Chittagong Gsm Forum
Any Problem In REGISTER
Helpline#sumon4218@yahoo.com
+8801970414564
Chittagong Gsm Forum

You are not connected. Please login or register

Here Is All Nokia F-bus Pin Out

View previous topic View next topic Go down  Message [Page 1 of 1]

1 Here Is All Nokia F-bus Pin Out on Tue May 03, 2011 9:29 pm

Here Is All Nokia F-bus Pin Out

[You must be registered and logged in to see this link.]



*** Cyclone Box Pinouts *** SERVICE socket
(10 pin layout)
1 - BOX GENIO1
2 - VBAT (5v)
3 - BOX GENIO2
4 - BSI
5 - BOX RX_1
6 - BOX TX_1
7 - MBUS
8 - GND
9 - VPP
10 - BOX GENIO3

As
you can see, pinout is compatible with UFS/JAF and other common Nokia
boxes. For DCT4 you can plug directly UFS/JAF cables without any
adapter. With BB5, most 8-pin market cables have TX2 instead VPP Pin.
Our box don't have connected data line to VPP - only to power IC.
Tx2
might be changed ON THE FLY to any of GENIO pins (in further updated
maybe also possible 100% flexible pinout modification, so ALL cables on
markets will be supported!).
Bundled adapter crossing pin 3 with 9.
That means on output from adapter, on pin 8 you will have TX2 (service
pin 3) and still compatibility with UFS/JAF cables will be. VPP is not
cutted. It's on pin nr 3 (unused pin nr 2 - jaf/ufs cables) so still VPP
funcionality can be used on 8 pin cables, instead of purchasing 10 pin!
With small mods needed, of course.
You can use too native 10pin Cyclone cables, but they are not avaiable on market at moment.


DIAGNOSTIC socket
1 - VBAT (5v)
2 - USART CLK
3 - USART TXD
4 - FREQ_MEASURMENT_A0
5 - FREQ_MEASURMENT_CLK
6 - DIAG_1_VOLTMETER
7 - DIAG_2_VOLTMETER
8 - DIAG_3_VOLTMETER
9 - USART RXD
10 - GND

Will be used soon.

Also here the ultimate Nokia cable finder..


[You must be registered and logged in to see this link.]
[You must be registered and logged in to see this link.]

View user profile

2 Re: Here Is All Nokia F-bus Pin Out on Tue May 03, 2011 10:43 pm

digital_amit wrote:Here Is All Nokia F-bus Pin Out

[You must be registered and logged in to see this link.]



*** Cyclone Box Pinouts *** SERVICE socket
(10 pin layout)
1 - BOX GENIO1
2 - VBAT (5v)
3 - BOX GENIO2
4 - BSI
5 - BOX RX_1
6 - BOX TX_1
7 - MBUS
8 - GND
9 - VPP
10 - BOX GENIO3

As
you can see, pinout is compatible with UFS/JAF and other common Nokia
boxes. For DCT4 you can plug directly UFS/JAF cables without any
adapter. With BB5, most 8-pin market cables have TX2 instead VPP Pin.
Our box don't have connected data line to VPP - only to power IC.
Tx2
might be changed ON THE FLY to any of GENIO pins (in further updated
maybe also possible 100% flexible pinout modification, so ALL cables on
markets will be supported!).
Bundled adapter crossing pin 3 with 9.
That means on output from adapter, on pin 8 you will have TX2 (service
pin 3) and still compatibility with UFS/JAF cables will be. VPP is not
cutted. It's on pin nr 3 (unused pin nr 2 - jaf/ufs cables) so still VPP
funcionality can be used on 8 pin cables, instead of purchasing 10 pin!
With small mods needed, of course.
You can use too native 10pin Cyclone cables, but they are not avaiable on market at moment.


DIAGNOSTIC socket
1 - VBAT (5v)
2 - USART CLK
3 - USART TXD
4 - FREQ_MEASURMENT_A0
5 - FREQ_MEASURMENT_CLK
6 - DIAG_1_VOLTMETER
7 - DIAG_2_VOLTMETER
8 - DIAG_3_VOLTMETER
9 - USART RXD
10 - GND

Will be used soon.

Also here the ultimate Nokia cable finder..


[You must be registered and logged in to see this link.]
[You must be registered and logged in to see this link.]


Thanks For Ur use full Post

View user profile http://ctggsm.betaboard.net

3 Re: Here Is All Nokia F-bus Pin Out on Wed May 04, 2011 10:41 am

Thanks Brother Very Happy

View user profile

Sponsored content


View previous topic View next topic Back to top  Message [Page 1 of 1]

Permissions in this forum:
You cannot reply to topics in this forum