Chittagong Gsm Forum
Any Problem In REGISTER
Helpline#sumon4218@yahoo.com
+8801970414564
Chittagong Gsm Forum

You are not connected. Please login or register

RIFF JTAG - Samsung B2710 (Samsung Xcover 271) Unbrick / Repair supported

View previous topic View next topic Go down  Message [Page 1 of 1]

SBRTeam


Head Of Site
Head Of Site
03.05.2011 Samsung B2710 (Samsung Xcover 271) Unbrick / Repair supported
Samsung B2710 resurrection is simple. Phone is auto powered on when USB Cable and battery are connected.
To resurrect Samsung B2710 do this:
Solder JTAG cable to the Samsung B2710 JTAG pads;
Connect USB cable to phone and PC;
Make sure Samsung B2710 is selected in the list of models
Click Resurrect button;
Wait few seconds until software signals a successful operation completion;
Disconnect USB cable, de-solder JTAG wires;
Now phone is in bootable condition, that is, even if it does not start up normally, you can flash it using original Samsung downloader software to restore it to the working state.
To enter download mode:
Disconnect PC cable;
Insert battery;
Hold both ‘Volume Down’ and ’9′ keys and press Power-On. Screen lights up with Download mode message.
Please click “Check For Updates” button in order to download and apply new files. Closing all running application before starting update process is recommended.
RIFF Box – JTAG Revolution

View user profile

View previous topic View next topic Back to top  Message [Page 1 of 1]

Permissions in this forum:
You cannot reply to topics in this forum